DATASHEET Mini V-ONU F01.pdf
1. SCOPE
This document describes basic electrical characteristics and mechanical characteristics of optical receiver FTTH-F01, which is produced in Shenzhen, PRC.
2. ELECTRICAL SEPCIFICATION
2.1 INPUTRANGE
2.1.1 OPTICAL INPUTRANGE
Optical receiver FTTH-F01 should operate within specification of optical input range from -15dBm to -5dBm. 2.1.2 DC INPUTRANGE
Optical receiver FTTH-F01 should operate within specification of DC input range from 4.8V to 5.2V.
2.2 OUTPUT LEVEL
The optical receiver should operate within specification of output level from 70dBµV to 73dBµV with optical input range is from -15dBm to -5dBm.
2.3 ESD SENSITIVITY
The optical receiver should operate within specification of ESD sensitivity according to the table below:
ESD | ESD sensitivity | Human body model; R=1.5KΩ;C=100pF | MAX=500 | 1 |
V |
2.4 RF PERFORMANCE REQUIRMENT
2.4.1 BANDWIDTH
The optical receiver should operate within specification of band width from 47MHz to 1000MHz
2.4.2 OUTPUT RETURNLOSS
The exact output return loss should apply the specification that S22 ≦-14dB
2.4.3 DISTORTION REQUIREMENT
The optical receiver should operate within specification of distortion requirement according to the table below:
Composite Triple Beat | dB | - | - | -58
| 60 channels; Measured at 543.25MHz Optical power@- 10dBm
|
Composite Second Order distortion | dB | - | - | -58
|
Noise carrier rating | dB | 43
| - | - |
2.5 OPTICAL PERFORMANCE SPECIFICATION
See the table below:
Parameter | λ1 | 1530 | 1550 | 1570 | nm |
|
Optical Wavelength Range | R | 0.90 | 0.95 | - | A/W | Op=0dBm ， λ=1550nm |
Responsivity | Id | - | 0.3 | 0.5 | nA |
|
Dark Current | IL | - | - | 0.7 | dB |
|
Insert Loss | ORL | - | - | - | dB
|
|
Return loss |
| - | 45 | - | λ=1550nm | λ=1550nm |
Optical Connector |
| - | SC
| - | Green | Green |
3. ENVIRONMENTAL SPECIFICATION
3.1 TEMPERATURE
The temperature include storage temperature and operating temperature, and the optical receiver should apply to the temperature specification as the table below
3.1.1 ABSOLUTE MAXIMUM RATINGS
Parameter | Symbol | Unit | Min | Typ | Max | Note |
Optical Input Power | Pin | dBm | - | - | +2.0 | Levels above max range may result in (latent) damages to the machine |
Storage Temperature | T-storage | ºC | -40 | - | +85 | 10 ... 95 % relative humidity; non-condensing |
3.1.2 OPERATING ENVIRONMENTAL LIMITS
Parameter | Symbol | Unit | Min | Typ | Max | Note |
Case Temperature | T-case | ºC | 0 | - | +80 | 10 ... 80 % relative humidity; non-condensing |
Power Supply Voltage | VPSU | V | 4.8 | 5.0 | 5.2 |
|
Power Consumption | PPSU | W | - | 0.6 | 1 | VB=5V |
FTTH-F01 RF SPECIFICATIONS:
Parameter | Symbol | Unit | Min | Typ | Max | Note |
RF passband | FPB | MHz | - | 75 | - | Minimum BW; |
RF output impedance | Rimp_out | Ω | - | - | - |
|
AGC working range for optical input power | Rimp_out | dBm | -15 | - | -5 | Optical AGC will be implemented,the average optical input power controls the gain.
|
RF output level | RFout | dBµV | 70 | 72 | 73 | Optical power input range in --5dBm~-15dBm
|
Flatness | Flatness | dB | - | ±1 |
| 47~1000MHz
|
Output Return Loss | ORL | dB | - | - | -14 |
Modulation Error Ratio | MER | dB | 33 | - | - | - Total 96channels
input ,OMI=3.5%,Optical
power@-15dBm
|
Bit Error Ratio | BER | dB |
|
| 1e-8 |
CNR | CNR | dB | 43 |
|
| 60 channels; Measured at
543.25MHz
Optical power@-10dBm
|
CSO | CSO | dBc | - | - | -58 |
CTB | CTB | dBc | - | - | -58 |
Total current consumption(DC) | Itot | mA | 130 | - | 170 | VB=5V |
If you want to know more our product details,Please reply to get E-Catelog and FOC samples,Thank you.
